|
|
Cutting Edge End Mills From Iscar Will Increase Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in several milling operations with Iscar's completely new Chatterfree carbide end mills. The cutters' variable-pitch flute pattern omits harmonic vibration, the central source of chatter. This enables faster cutting and excellent finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report longer edge life due to diminished chatter. The chatter-free feature is attainable in both solid carbide endmills and tips in Iscar's Multi-Master replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for Multi-Master tips. These completely new endmills are excellent for lower power machines with ISO40 or BT40 adaptations. The solid carbide variant can handle full slot machining up to 2xD. Depth ability on the replaceable-tip version is more restrained since the active length is shorter. In full slotting applications on alloy steel, the solid carbide build efficiently handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.
Finishred - Revolutionary Solid Carbide Endmills
Iscar is announcing the EFR.. B44 and the MM EFS.. Finishred a advanced solid carbide end mills family. The Finishred carbide endmill is a mixture of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more quickly and accurately than traditional endmills. However, roughing endmills leave grooves on the machined surface. In repercussion, after using a roughing endmill, a finishing endmill has to be used in order to obtain a even surface finish. This requires time-consuming tool change, setup time and inevitably of keeping two endmill types in the inventory.
Benefits of the Finishred Endmills:
The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and two continuous flutes.
The cutting edges of the finishing flutes are radially more distant from the tool axis than the cutting edges of the serrated flutes. The finishing flutes eliminate the grooves induced by the roughing flutes, leaving a smooth surface finish.
The tool is fully competent and allows running at rough machining parameters, ending in finish surface quality.
The notable tool design decreases vibration at high load applications.
The tool creates short and long chips simultaneously. This chip mixture is evacuated more easily than each individual chip type, an exceptional solution in slotting and cavity milling operations.
The Finishred is also accessible with the Multi-Master indexable milling head option which merges the Finishred includes with the benefit of little setup time, no regrinding costs and the comprehensive range of shank and extension choices are accessible for the Multi-Master milling heads.
A single tool substitutes the roughing and finishing endmills; therefore lowering stock.
Tool change and setup time can be eliminated.
An added tool position is attained on the machine
New Chip Splitting Solid Carbide Endmills for Elevated Metal Removal Rates
ISCAR is introducing the ECP-3/4L family of chip splitting endmills. The unprecedented endmills are offered with 3 and four 38 degree flutes in grade IC900. They feature 2xD and long shanks with reduced neck diameter, which aid machining along high shoulders, at high feeds. These endmills, due to their chip splitting element and force distribution can be used very adequately on low power machines (CAT40/BT40/ISO40). The serrated cutting edge includes flat peaks which leave a improved surface finish, in contrast to the current rougher carbide endmills. The ECP endmills are advocated for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the preliminary tests conducted at numerous customers' locations showed exceptional results.
Iscar Announces A Completely New Line Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Iscar Recently Releases Many Revolutionary Lines To Extend Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Iscar Adds Their Latest Creations To A Lengthy Line Of Flourishing Hole Producing Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
New Tools And Carbide Insert Arrangements From Iscar To Better Enhance The Machining Method
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.
A Few Of The Many Improvements In Carbide Inserts From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
A Number Of Improvements In Carbide Inserts From Iscar Through The Previous Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.
Brand-New Car Manufacturing Jobs To Help In Protecting The Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.
Clarification Of Auto Engineering Jobs.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.
|
More Articles
Blogroll
|
